Cisco Cisco ASA 5510 Adaptive Security Appliance Leaflet
4-67
Cisco ASA Series 명령 참조, S 명령
4장 show bgp through show cpu 명령
show bgp neighbors
show bgp neighbors:
예
다음은 172.16.1.2에 있는 BGP 네이버에 대해 BGP TCP 경로 MTU(최대 전송 단위) 검색이 활성화
되어 있는지 확인하는 show bgp neighbors 명령의 샘플 출력입니다.
되어 있는지 확인하는 show bgp neighbors 명령의 샘플 출력입니다.
ciscoasa# show bgp neighbors 172.16.1.2
BGP neighbor is 172.16.1.2, remote AS 45000, internal link
BGP version 4, remote router ID 172.16.1.99
.
.
.
For address family: IPv4 Unicast
BGP table version 5, neighbor version 5/0
.
.
.
Address tracking is enabled, the RIB does have a route to 172.16.1.2
Address tracking requires at least a /24 route to the peer
Connections established 3; dropped 2
Last reset 00:00:35, due to Router ID changed
Transport(tcp) path-mtu-discovery is enabled
.
.
.
SRTT: 146 ms, RTTO: 1283 ms, RTV: 1137 ms, KRTT: 0 ms
minRTT: 8 ms, maxRTT: 300 ms, ACK hold: 200 ms
Flags: higher precedence, retransmission timeout, nagle, path mtu capable
다음은 192.168.3.2에 있는 외부 BGP 피어에 대한 BGP 정상 재시작 기능의 상태를 확인하는 show
bgp neighbors
명령의 일부 출력입니다. 이 BGP 피어에 대해 정상 재시작이 비활성화된 것으로 표
시됩니다.
ciscoasa# show bgp neighbors 192.168.3.2
BGP neighbor is 192.168.3.2, remote AS 50000, external link
Inherits from template S2 for session parameters
BGP version 4, remote router ID 192.168.3.2
BGP state = Established, up for 00:01:41
Last read 00:00:45, last write 00:00:45, hold time is 180, keepalive intervals
Neighbor sessions:
1 active, is multisession capable
Neighbor capabilities:
Route refresh: advertised and received(new)
Address family IPv4 Unicast: advertised and received
.
.
.
Address tracking is enabled, the RIB does have a route to 192.168.3.2
Connections established 1; dropped 0
Last reset never
Transport(tcp) path-mtu-discovery is enabled
Graceful-Restart is disabled
Connection state is ESTAB, I/O status: 1, unread input bytes: 0