Cisco Cisco ASA 5510 Adaptive Security Appliance Leaflet

Page of 1264
 
5-83
Cisco ASA Series 명령 참조, S 명령      
 
5      show crashinfo through show curpriv 명령
  show cts sxp connections     
사용 지침
SXP 상태는 다음 조건에 따라 변경됩니다. 
  •
해당 피어가 SXP를 구성하지 않았거나 비활성화했기 때문에 SXP 수신기가 SXP 연결을 끊은 
경우 SXP 수신기는 OFF 상태로 전환됩니다. 
  •
해당 피어가 충돌하거나 인터페이스를 종료했기 때문에 SXP 수신기가 SXP 연결을 끊은 경우 
SXP 수신기는 DELETE_HOLD_DOWN 상태로 전환됩니다. 
  •
SXP 스피커는 처음 두 조건 하나가 발생하는 경우 OFF 상태로 전환됩니다.
이 명령은 대체작동 컨피그레이션의 대기 디바이스에서는 지원되지 않습니다. 대기 디바이스에서 
이 명령을 입력한 경우 다음 오류 메시지가 표시됩니다.
ERROR: This command is only permitted on the active device.
이 명령은 클러스터링 컨피그레이션의 마스터 디바이스에서만 지원됩니다. 슬레이브 디바이스에
서 이 명령을 입력한 경우 다음 오류 메시지가 표시됩니다.
This command is only permitted on the master device.
다음은 show cts sxp connections 명령의 샘플 출력입니다.
ciscoasa# show cts sxp connections
SXP               : Enabled
Highest version   : 2
Default password  : Set
Default local IP  : Not Set
Reconcile period  : 120 secs
Retry open period : 10 secs
Retry open timer  : Not Running
Total number of SXP connections : 3
Total number of SXP connection shown : 3
----------------------------------------------
Peer IP           : 2.2.2.1
Local IP          : 2.2.2.2
Conn status       : On
Local mode        : Listener
Ins number        : 1
TCP conn password : Default
Delete hold down timer : Not Running
Reconciliation timer   : Not Running
Duration since last state change: 0:00:01:25 (dd:hr:mm:sec)
----------------------------------------------
Peer IP           : 3.3.3.1
Local IP          : 3.3.3.2
Conn status       : On
Local mode        : Listener
Ins number        : 2
TCP conn password : None 
Delete hold down timer : Not Running
Reconciliation timer   : Not Running
Duration since last state change: 0:01:02:20 (dd:hr:mm:sec)
----------------------------------------------
Peer IP           : 4.4.4.1
Local IP          : 4.4.4.2
Conn status       : On
Local mode        : Speaker
Ins number        : 1
TCP conn password : Set 
Delete hold down timer : Not Running
Reconciliation timer   : Not Running
Duration since last state change: 0:03:01:20 (dd:hr:mm:sec)