Cisco Cisco ASA 5510 Adaptive Security Appliance Leaflet
6-44
Cisco ASA Series 명령 참조 , S 명령
6장 show ddns update interface through show environmentevent manager 명령
show eigrp topology
다음은 IP 주소와 함께 사용된 show eigrp topology 명령의 샘플 출력입니다. 표시된 출력은 내부
경로에 대한 것입니다.
경로에 대한 것입니다.
ciscoasa# show eigrp topology 10.2.1.0 255.255.255.0
EIGRP-IPv4 (AS 100): Topology Default-IP-Routing-Table(0) entry for entry for 10.2.1.0
255.255.255.0
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 281600
Routing Descriptor Blocks:
0.0.0.0 (Ethernet0/0), from Connected, Send flag is 0x0
Composite metric is (281600/0), Route is Internal
Vector metric:
Minimum bandwidth is 10000 Kbit
Total delay is 1000 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 0
다음은 IP 주소와 함께 사용된 show eigrp topology 명령의 샘플 출력입니다. 표시된 출력은 외부
경로에 대한 것입니다.
경로에 대한 것입니다.
ciscoasa# show eigrp topology 10.4.80.0 255.255.255.0
EIGRP-IPv4 (AS 100): Topology Default-IP-Routing-Table(0) entry for entry for 10.4.80.0
255.255.255.0
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 409600
Routing Descriptor Blocks:
10.2.1.1 (Ethernet0/0), from 10.2.1.1, Send flag is 0x0
Composite metric is (409600/128256), Route is External
Vector metric:
Minimum bandwidth is 10000 Kbit
Total delay is 6000 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 1
External data:
Originating router is 10.89.245.1
AS number of route is 0
External protocol is Connected, external metric is 0
Administrator tag is 0 (0x00000000)
관련 명령
명령
설명
clear eigrp topology
EIGRP 토폴로지 테이블에서 동적으로 검색된 항목을 지웁니다.