Cisco Cisco ASA 5510 Adaptive Security Appliance Leaflet
7-7
Cisco ASA Series 명령 참조, S 명령
7장 show failover through show ipsec stats traffic 명령
show failover
VPN CTCP upd 0 0 0 0
VPN SDI upd 0 0 0 0
VPN DHCP upd 0 0 0 0
SIP Session
0 0 0 0
Logical Update Queue Information
Cur Max Total
Recv Q: 0 1 1895
Xmit Q: 0 0 1940
다음은 ASA 5505에서 실행한 show failover 명령의 샘플 출력입니다.
Failover On
Failover unit Primary
Failover LAN Interface: fover Vlan150 (up)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 4 of 250 maximum
Version: Ours 7.2(0)55, Mate 7.2(0)55
Last Failover at: 19:59:58 PST Apr 6 2006
This host: Primary - Active
Active time: 34 (sec)
slot 0: ASA5505 hw/sw rev (1.0/7.2(0)55) status (Up Sys)
Interface inside (192.168.1.1): Normal
Interface outside (192.168.2.201): Normal
Interface dmz (172.16.0.1): Normal
Interface test (172.23.62.138): Normal
slot 1: empty
Other host: Secondary - Standby Ready
Active time: 0 (sec)
slot 0: ASA5505 hw/sw rev (1.0/7.2(0)55) status (Up Sys)
Interface inside (192.168.1.2): Normal
Interface outside (192.168.2.211): Normal
Interface dmz (172.16.0.2): Normal
Interface test (172.23.62.137): Normal
slot 1: empty
다음은 활성-활성 설정에 대한 show failover state 명령의 샘플 출력입니다.
ciscoasa(config)# show failover state
State Last Failure Reason Date/Time
This host - Secondary
Group 1 Failed Backplane Failure 03:42:29 UTC Apr 17 2009
Group 2 Failed Backplane Failure 03:42:29 UTC Apr 17 2009
Other host - Primary
Group 1 Active Comm Failure 03:41:12 UTC Apr 17 2009
Group 2 Active Comm Failure 03:41:12 UTC Apr 17 2009
====Configuration State===
Sync Done
====Communication State===
Mac set