Cisco Cisco ASA 5510 Adaptive Security Appliance Leaflet

11-23

Cisco ASA Series 명령 참조, S 명령

11장 show pager through show route 명령

show port-channel

다음은 show port-channel summary 명령의 샘플 출력입니다.

ciscoasa# show port-channel summary

Number of channel-groups in use: 1

Group Port-channel Protocol Ports

------+-------------+-----------+-----------------------------------------------

1 Po1 LACP Gi3/1 Gi3/2 Gi3/3

다음은 show port-channel detail 명령의 샘플 출력입니다.

ciscoasa# show port-channel detail

Channel-group listing:

-----------------------

Group: 1

----------

Ports: 3 Maxports = 16

Port-channels: 1 Max Port-channels = 48

Protocol: LACP/ active

Minimum Links: 1

Maximum Bundle: 8

Load balance: src-dst-ip

Ports in the group:

-------------------

Port: Gi3/1

------------

Port state = bndl

Channel group = 1 Mode = LACP/ active

Port-channel = Po1

Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.

A - Device is in active mode. P - Device is in passive mode.

Local information:

LACP port Admin Oper Port Port

Port Flags State Priority Key Key Number State

-----------------------------------------------------------------------------

Gi3/1 SA bndl 32768 0x1 0x1 0x302 0x3d

Partner's information:

Partner Partner LACP Partner Partner Partner Partner Partner

Port Flags State Port Priority Admin Key Oper Key Port Number Port State

-----------------------------------------------------------------------------------

Gi3/1 SA bndl 32768 0x0 0x1 0x306 0x3d

Port: Gi3/2