Intel E1600 HH80557PG056D Data Sheet

Datasheet

85

Several configuration options can be configured by hardware. The processor samples 

the hardware configuration at reset, on the active-to-inactive transition of RESET#. For 

specifications on these options, refer to 

The sampled information configures the processor for subsequent operation. These 

configuration options cannot be changed except by another reset. All resets reconfigure 

the processor; for reset purposes, the processor does not distinguish between a 

"warm" reset and a "power-on" reset.

1. Asserting this signal during RESET# will select the corresponding option.

2.

Address signals not identified in this table as configuration options should not 

be asserted during RESET#.

3. Disabling of any of the cores within the processor must be handled by 

configuring the EXT_CONFIG Model Specific Register (MSR). This MSR will allow 

for the disabling of a single core. 

Output tristate

SMI#

Execute BIST

A3#

Disable dynamic bus parking

A25#

Symmetric agent arbitration ID

BR0#

RESERVED

A[8:5]#, A[24:11]#, A[35:26]#