Cisco Cisco Aironet 1400 Wireless Bridge Release Notes
7
Release Notes for Cisco Aironet 1410 Bridges for Cisco IOS Release 12.2(11)JA1
OL-4683-01
Caveats
Bridge Power Up LED Colors
During power up the bridge LEDs display the following color sequences:
1.
The Install LED is initially turned off.
2.
The Install LED turns amber.
3.
The Status LED turns amber during the boot loader process.
4.
The Ethernet, Status, and Radio LEDs turn green during the loading of the operating system.
5.
The Ethernet, Status, and Radio LEDs turn amber during the loop-back test.
6.
The Status LED starts to blink green then the Ethernet LED starts to blink green.
7.
The Ethernet, Status, and Radio LEDs blink amber twice to indicate that the auto install process has
started.
started.
8.
During the auto install process, the Ethernet, Status, and Radio LEDs turn off for a short time period
then go through a blinking sequence twice. Each LED sequentially blinks at the following rates
before becoming continuously amber:
then go through a blinking sequence twice. Each LED sequentially blinks at the following rates
before becoming continuously amber:
a.
Slow blinking rate of 1 blink/sec.
b.
Medium blinking rate of 2 blinks/sec.
c.
Fast blinking rate of 4 blinks/sec.
9.
The Install LED starts to blink amber to indicate that the bridge is searching for a root bridge.
10.
When the bridge associates to a root bridge, the Install LED turns amber.
11.
When the bridge becomes a root bridge and is waiting for a non-root bridge to associate, the Install
LED blinks green.
LED blinks green.
12.
When the root bridge has a non-root bridge associated, the Install LED turns green.
Caveats
This section lists open caveats in Cisco IOS Release 12.2(11)JA1 for the bridge.
Open Caveats
These caveats are open in Cisco IOS Release 12.2(11)JA1 for the bridge:
•
CSCea28990—Cannot pass IP traffic when bridge # route IP is configured.
The bridge # route ip command must not be configured for the bridge groups assigned to non-native
VLANS because this setting stops IP traffic across the bridge for those non-native VLANS.
VLANS because this setting stops IP traffic across the bridge for those non-native VLANS.
•
CSCea57649—The CLI Help command produces incorrect output for the radio interface.
When using the CLI Help command from the radio interface, the command output is repeated
multiple times.
multiple times.
There is no workaround for this problem.
•
CSCea75989—The non-root bridge does not reset the dot11 association counters when it reassociates to
the root bridge.
the root bridge.
There is no workaround for this problem.