Cisco Cisco Email Security Appliance X1070 Troubleshooting Guide
GUI
From the ESA GUI, navigate to Monitor > System Status in order to view the Resource Conservation mode
status.
status.
CLI
Enter the status detail command into the ESA CLI in order to verify whether an appliance has entered
Resource Conservation mode.
Resource Conservation mode.
The Resource Conservation value shown in both the GUI and CLI is a value between 0 and 60, or the number
999. Numbers from 0 to 60 represent the degree to which the system is decreasing its acceptance of messages
in order to prevent the rapid depletion of critical system resources. Higher numbers represent a higher degree
of decreased acceptance. Zero represents no decrease in acceptance, a system operating at its full acceptance
rate. If the Resource Conservation value shows 999, the system will accept no injected messages.
999. Numbers from 0 to 60 represent the degree to which the system is decreasing its acceptance of messages
in order to prevent the rapid depletion of critical system resources. Higher numbers represent a higher degree
of decreased acceptance. Zero represents no decrease in acceptance, a system operating at its full acceptance
rate. If the Resource Conservation value shows 999, the system will accept no injected messages.
Updated: Jun 24, 2014
Document ID: 117834