Cisco Cisco 3310 Mobility Services Engine Release Notes

To decompress (unzip) the file, execute: gunzip CISCO-MSE-L-K9-7-4-110-0-0-64bit.bin.gz.

Enter the following command: 

Stop the MSE service using the following command:

Uninstall the existing MSE software. Choose deletion of database when prompted.

Invoke the MSE installer. 

Doing so installs the new database using the four .zip files for the database along with the MSE software.

Initial database installation can take a long time (20 minutes at least -or- approximately). Do not cancel 
the installer midway through the installation process.

Once installed, follow the regular procedure to start, stop, or add an MSE to the Prime Infrastructure.

The MSE appliance needs to be rebooted using the “reboot” command before starting the MSE services.

To upgrade the MSE to 7.4.110.0 from 7.x release, follow these steps:

Complete database installation is not required if you are upgrading from 7.0.201.204

Download CISCO-MSE-L-K9-7-4-110-0-64bit.bin.gz to the MSE using the standard Prime 
Infrastructure download software page.

Transfer the software to the /opt/installers directory on the MSE server via FTP or another transport 
method.

Unzip the file: gunzip CISCO-MSE-L-K9-7-4-110-0-64bit.bin.gz

Enter the following command:

Run this command: service msed stop and restart the MSE.

Execute the file with ./CISCO-MSE-L-K9-7-4-110-0-64bit.bin

The installer automatically detects if there is an old database present and asks the relevant questions.

To restore an old database, follow these steps: 

The regular Restore option on the Prime Infrastructure cannot be used to restore an older database of 
older releases such as 6.0, 7.0.105.0, or 7.0.110.0 onto 7.4.110.0.