Cisco Cisco 3365 Mobility Services Engine Release Notes
14
Release Notes for Cisco 3300 and Cisco 3350 Series Mobility Services Engine, Release 7.0.105.0
OL-22876-01
Important Notes
Location History Time stamps Match Browser’s Location
The WCS time stamp is based on the browser’s location and not on the mobility services engine settings.
Changing the time zone on WCS or on the mobility services engine does not change the time stamp for
the location history.
Changing the time zone on WCS or on the mobility services engine does not change the time stamp for
the location history.
PDAs with Limited Probe Requests Might Affect Location
Many PDAs do not continuously send out probe requests after an initial association to the CUWN.
Therefore, calculating the location accuracy of such PDAs using RSSI readings is not always optimal.
Therefore, calculating the location accuracy of such PDAs using RSSI readings is not always optimal.
Mandatory Setting Required on Intel 802.11n and 802.11 b/g/n
Client Cards for Accurate Calibration
The Cisco CX RM option within Intel’s Enterprise Security Profile must be enabled to ensure adequate
calibration data points are collected for Intel 802.11n and 802.11 b/g/n client cards. You can use the Intel
Client Software PROSET package to enable the Cisco CX RM option in the Enterprise Security Profile
(CSCsl40623).
calibration data points are collected for Intel 802.11n and 802.11 b/g/n client cards. You can use the Intel
Client Software PROSET package to enable the Cisco CX RM option in the Enterprise Security Profile
(CSCsl40623).
Operational Notes for wIPS
This section lists the operational notes for a mobility services engine.
Mobility Services Engine with wIPS Service Enabled Mistakenly Allows a Controller to Be
Assigned to Multiple MSEs
Assigned to Multiple MSEs
When wIPS is configured on the mobility services engine, a controller can be assigned to more than one
mobility services engine in error. By design, a controller can only be assigned to one mobility services
engine and an error appears in the WCS page when you synchronize a mobility services engine and a
controller (CSCsx38955).
mobility services engine in error. By design, a controller can only be assigned to one mobility services
engine and an error appears in the WCS page when you synchronize a mobility services engine and a
controller (CSCsx38955).
WCS Screen and Navigation Changes
•
Services replaces Mobility in the navigation bar of WCS.
•
A centralized license center to install and view license status is available (Administration > License
Center).
Center).
•
A Switches tab is a new synchronize option to support the new wired Catalyst switch and wired
client feature (Services > Synchronize Services).
client feature (Services > Synchronize Services).