Cisco Cisco 3365 Mobility Services Engine Release Notes

Release Notes for Cisco Mobility Services Engine, Release 7.4.121.0

OL-28564-03

Upgrading the MSE

!!!!!! IMPORTANT NOTE !!!! :

---------------------------------

The system is minimally configured right now. It is strongly recommended that you run the

setup script under /opt/mse/setup/setup.sh to configure all appliance related parameters

immediately after installation is complete. The hostname must be set correctly on the

system. The Cisco MSE platform will NOT start if it is configured incorrectly or not

configured at all. Additionally, it is strongly recommended that the Cisco MSE is

configured to use the same NTP servers as the controllers with which it will be

synchronized. This is essential to the correct operation of the Cisco Mobility Services

Engine. Both these parameters may be configured as part of the setup script.

PRESS <ENTER> TO CONTINUE:

-------------------------------------------------

Importing Data

-------------------------------------------------

Loading data into newly installed database. This may take a while ......

PRESS <ENTER> TO CONTINUE:

Upgrading the MSE to 7.4.121.0 from Older Releases

To upgrade the MSE to 7.4.121.0 from older releases, follow these steps:

Note

Complete database installation is not required for upgrading from 7.0.201.204

Step 1

Download CISCO-MSE-L-K9-7-4-121-0-64bit.bin.gz to the MSE using the standard Prime
Infrastructure download software page.

Step 2

cd /opt/installers

./CISCO-MSE-L-K9-7-4-121-0-64.bit.bin

Step 3

Answer the questions when prompted.

The installer automatically detects if there is an old database present and asks the relevant questions.

Restoring from an Old Database to 7.4.121.0

To restore an old database, follow these steps:

Note

The regular Restore option on the Prime Infrastructure cannot be used to restore an older database of
older releases such as 6.0, 7.0.105.0, or 7.0.110.0 onto 7.4.120.0.

Step 1

Stop the running MSE 7.4.120.0.