Cisco Cisco 3365 Mobility Services Engine Release Notes
17
Release Notes for Cisco 3300 Series Mobility Services Engine, Release 7.3.101.0
OL-24938-06
Important Notes
Floor Change or Minimum Distance Required for Location Transitions to Post to the History Log
When history logging is enabled for any or all elements (client stations, asset tags, rogue clients, and
access points), a location transition for an element is posted only if it changes floors or the new location
of the element is at least 30 feet (10 meters) from its original location.
access points), a location transition for an element is posted only if it changes floors or the new location
of the element is at least 30 feet (10 meters) from its original location.
Note
The other conditions for history logging are as follows:
•
Clients: Association, authentication, re-association, re-authentication, or disassociation.
•
Tags: Tag Emergency button.
•
Interferers: Interferer severity change, cluster center change, or merge.
See Services > Mobility Services > Device Name > Context Aware Service > Administration > History
Parameters.
Parameters.
Logs can be viewed at Services > Mobility Services > Device Name > Systems > Log.
AeroScout MobileView Release 4.1 Required for Northbound Notifications
If AeroScout MobileView Release 4.1 and earlier is in use, incorrect responses are sent to those
northbound notifications received from the mobility services engine. Northbound notifications are then
sent again by the mobility services engine, overloading the notification queue and resulting in reports of
dropped notifications.
northbound notifications received from the mobility services engine. Northbound notifications are then
sent again by the mobility services engine, overloading the notification queue and resulting in reports of
dropped notifications.
The workaround for this is to upgrade to AeroScout MobileView Version 4.1 (CSCsx56618).
Separate Partner Engine Software Install Not Required for Tag Contextual Information
In Release 5.2 and later, the partner software that supports tag contextual information (temperature,
availability, and location calculations) is bundled into the mobility services engine software. No separate
download of partner engine software is required as in Release 5.1.
availability, and location calculations) is bundled into the mobility services engine software. No separate
download of partner engine software is required as in Release 5.1.
Non-Cisco Compatible Extensions Tags Not Supported
The mobility services engine does not support non-Cisco CX Wi-Fi tags. Additionally, these
non-compliant tags are not used in location calculations or shown on the Prime Infrastructure maps.
non-compliant tags are not used in location calculations or shown on the Prime Infrastructure maps.
Cisco Compatible Extensions Version 1 Tags Required at a Minimum
Only Cisco CX Version 1 (or later) tags are used in location calculations and mapped in the Prime
Infrastructure.
Infrastructure.
Monitoring Information Varies for Clients and Tags
Note
This information is missing if the AeroScout Tag Engine is used.