Cisco Cisco 5760 Wireless LAN Controller Technical References
Controller(config-pmap-c)#
set dscp 7
Controller(config-pmap-c)#
service-policy port-plcmap-1
Controller(config-pmap-c)#
exit
Controller(config-pmap)#
class-map cm-2
Controller(config-pmap-c)#
match ip dscp 2
Controller(config-pmap-c)#
service-policy port-plcmap-1
Controller(config-pmap)#
exit
Controller(config-pmap)#
class-map cm-3
Controller(config-pmap-c)#
match ip dscp 3
Controller(config-pmap-c)#
service-policy port-plcmap-2
Controller(config-pmap)#
exit
Controller(config-pmap)#
class-map cm-4
Controller(config-pmap-c)#
trust dscp
Controller(config-pmap)#
exit
Controller(config)#
int vlan 10
Controller(config-if)#
Controller(config-if)#
Controller(config-if)#
ser input vlan-plcmap
Controller(config-if)#
exit
Controller(config)#
exit
Controller#
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
Description
Command
Creates or modifies a policy map that can be attached
to multiple ports to specify a service policy.
to multiple ports to specify a service policy.
policy-map
Displays QoS policy maps.
show policy-map, on page 196
Displays the operating configuration.
show running-config
Related Commands
Description
Command
Creates or modifies a policy map that can be attached to multiple physical
ports or SVIs and enters policy-map configuration mode.
ports or SVIs and enters policy-map configuration mode.
Displays QoS policy maps.
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
167
service-policy