Cisco Cisco 5760 Wireless LAN Controller Technical References

Page of 1016
Port-channel: Po1 (Primary Aggregator)
------------
Age of the Port-channel = 01d:20h:24m:50s
Logical slot/port = 10/1 Number of ports = 2
Logical slot/port = 10/1 Number of ports = 2
Port state = Port-channel Ag-Inuse
Protocol = LACP
Ports in the Port-channel:
Index
Load
Port
EC state
No of bits
------+------+------+------------------+-----------
0
00
Gi1/0/1 Active
0
0
00
Gi1/0/2 Active
0
Time since last port bundled: 01d:20h:24m:44s Gi1/0/2
This is an example of output from show etherchannel protocol command:
Controller#
show etherchannel protocol
Channel-group listing:
-----------------------
Group: 1
----------
Protocol: LACP
Group: 2
----------
Protocol: PAgP
Related Commands
Description
Command
Assigns an Ethernet port to an EtherChannel group, or enables an
EtherChannel mode, or both.
Restricts the protocol used on a port to manage channeling.
Accesses or creates a port channel.
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)    
   OL-29471-01
491
show etherchannel