Cisco Cisco 5760 Wireless LAN Controller Technical References
(Optional) Enables stackwise stack power priority conflict trap.
power-priority-conflict
(Optional) Enables stackwise stack power version mismatch
discovered trap.
discovered trap.
power-version-mismatch
(Optional) Enables stackwise stack ring redundant trap.
ring-redundant
(Optional) Enables stackwise stack mismatch trap.
stack-mismatch
(Optional) Enables stackwise stack power unbalanced power
supplies trap.
supplies trap.
unbalanced-power-supplies
(Optional) Enables stackwise stack power under budget trap.
under-budget
(Optional) Enables stackwise stack power under voltage trap.
under-voltage
Command Default
The sending of SNMP stackwise traps is disabled.
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
Specify the host (NMS) that receives the traps by using the snmp-server host global configuration command.
If no trap types are specified, all trap types are sent.
If no trap types are specified, all trap types are sent.
Informs are not supported in SNMPv1.
Note
To enable more than one type of trap, you must enter a separate snmp-server enable traps command for
each trap type.
each trap type.
Examples
This example shows how to generate stackwise stack power GLS traps:
Controller(config)#
snmp-server enable traps stackwise GLS
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
968
OL-29471-01
snmp-server enable traps stackwise