Cisco Cisco 5760 Wireless LAN Controller Technical References
mac address-table move update
To enable the MAC address-table move update feature, use the mac address-table move update command
in global configuration mode on thecontroller stack or on a standalone controller. To return to the default
setting, use the no form of this command.
in global configuration mode on thecontroller stack or on a standalone controller. To return to the default
setting, use the no form of this command.
mac address-table move update {receive | transmit}
no mac address-table move update {receive | transmit}
Syntax Description
Specify that the controller processes MAC address-table move update
messages.
messages.
receive
Specify that the controller sends MAC address-table move update
messages to other controlleres in the network if the primary link goes
down and the standby link comes up.
messages to other controlleres in the network if the primary link goes
down and the standby link comes up.
transmit
Command Default
By default, the MAC address-table move update feature is disabled.
Command Modes
Global configuration.
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
The MAC address-table move update feature allows the controller to provide rapid bidirectional convergence
if a primary (forwarding) link goes down and the standby link begins forwarding traffic.
if a primary (forwarding) link goes down and the standby link begins forwarding traffic.
You can configure the accesscontroller to send the MAC address-table move update messages if the primary
link goes down and the standby link comes up. You can configure the uplinkcontrolleres to receive and process
the MAC address-table move update messages.
link goes down and the standby link comes up. You can configure the uplinkcontrolleres to receive and process
the MAC address-table move update messages.
Examples
This example shows how to configure an access controller to send MAC address-table move update messages:
Controller#
configure terminal
Controller#
mac address-table move update transmit
Controller#
end
This example shows how to configure an uplink controller to get and process MAC address-table move update
messages:
messages:
Controller#
configure terminal
Controller#
mac address-table move update receive
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
55
mac address-table move update