Cisco Cisco 5508 Wireless Controller Technical References
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
2 GHz: 4x4:3
•
• 5 GHz: 4x4:3
• Power Options:
• 100 – 277 VAC, 50 – 60 Hz
• 10 – 16 VDC
• UPoE
• PoE with AIR-PWRINJ1500-2=
• 802.3at PoE Out Capable when powered via AC/DC power
• Console Port
• LTE and WIMAX Signal Rejection (2.1 / 2.3 GHz; 30 dB; 2.5 GHz; 35 dB)
• GPS Option
The 1572EAC has four Gigabit Ethernet ports, the Ethernet port, SFP port, PoE-In port, and the PoE-Out port. Any port can be used
to provide uplink access back to a WLC, but only one uplink port can be used for WLC access at a given time. LAG for redundancy
is not supported. Ethernet Bridged wired clients or Daisy-chained APs should be connected to either the Ethernet port or PoE-Out
port only. The SFP port requires an additional SFP connector to be inserted into the SFP port.
to provide uplink access back to a WLC, but only one uplink port can be used for WLC access at a given time. LAG for redundancy
is not supported. Ethernet Bridged wired clients or Daisy-chained APs should be connected to either the Ethernet port or PoE-Out
port only. The SFP port requires an additional SFP connector to be inserted into the SFP port.
The 1572EAC can be powered either by PoE-in, using a PoE injector or UPoE, AC, DC, or Power over cable. The PoE injector can
power the AP, even if the AP has no WAN connectivity and is operating as a Mesh AP.
power the AP, even if the AP has no WAN connectivity and is operating as a Mesh AP.
The LED can be used to determine the status of the AP. The LED flashing sequences are listed in the
LED Flashing Sequences
section.
14