Cisco Cisco Clean Access 3.5
6-7
Cisco Clean Access Server Installation and Administration Guide
OL-7045-01
Chapter 6 IPSec/L2TP/PPTP/PPP on the CAS
Configure L2TP Encryption
To set up L2TP:
1.
Click the L2TP link in the Network tab to open the form.
Figure 6-6
L2TP
2.
Click the Enable option.
3.
In the L2TP IP Pool field, type the IP address range to be used for the point-to-point connections.
Optionally, enter DNS and WIN Server addresses for the pool.
Optionally, enter DNS and WIN Server addresses for the pool.
4.
In the PPP form, enter the connection password (see
) and click Update.
5.
Click the Restart L2TP Service button.