Cisco Cisco Clean Access 3.5
7-5
Cisco Clean Access Server Installation and Administration Guide
OL-7045-01
Chapter 7 Integrating with Cisco VPN Concentrators
Configure Clean Access for VPN Concentrator Integration
Enable L3 Support on the CAS
With release 3.5(5) and above, the “Enable L3 support for Clean Access Agent” option must be
checked on the CAS (under Device Management > Clean Access Servers > Manage[CAS_IP] >
Network > IP) for the Clean Access Agent to work in VPN tunnel mode.
checked on the CAS (under Device Management > Clean Access Servers > Manage[CAS_IP] >
Network > IP) for the Clean Access Agent to work in VPN tunnel mode.
1.
Go to Device Management > CCA Servers > List of Servers > Manage [CAS_IP] > Network >
IP.
IP.
Figure 7-4
CAS Network Tab — Enable L3 Support
2.
The Clean Access Server Type, Trusted Interface, and Untrusted Interface settings should
already be correctly configured (from when the CAS was added).
already be correctly configured (from when the CAS was added).
3.
Click the checkbox for Enable L3 Support for Clean Access Agent.
4.
Click Update.
5.
Click Reboot.
Note
The enable/disable L3 feature and is disabled by default with release 3.5(5) and above. You must
Update and Reboot for changes in this setting to take effect.
Update and Reboot for changes in this setting to take effect.