Cisco Cisco Clean Access 3.5
13-6
Cisco Clean Access Server Installation and Administration Guide
OL-7045-01
Chapter 13 Upgrading to a New Software Release
Upgrading via Web Console (from 3.5.3 and Above Only)
Step 2
On the Cisco Secure Software page for Cisco Clean Access, click the link for the appropriate release.
Upgrade files use the following format (replace the .x in the file name with the minor version number to
which you are upgrading, for example, cca_upgrade_3.5.8.tar.gz):
Upgrade files use the following format (replace the .x in the file name with the minor version number to
which you are upgrading, for example, cca_upgrade_3.5.8.tar.gz):
–
cca_upgrade_3.5.x.tar.gz (CAM/CAS release upgrade file)
–
cca-3.5.x-to-3.5.x.y-upgrade.tar.gz (CAM/CAS patch upgrade file)
–
cam-3.5.x-to-3.5.x.y-upgrade.tar.gz (CAM-only patch upgrade file)
–
cas-3.5.x-to-3.5.x.y-upgrade.tar.gz (CAS-only patch upgrade file)
Step 3
Download the file to the local computer from which you are accessing the CAM web console.
Upgrade CAS from CAS Management Pages (3.5.5 and above)
Once release 3.5(5) is installed on the CAS, web upgrades to the CAS (e.g. to 3.5(6) and above) can be
performed via the CAS management pages as described below. If you are running release 3.5(3) or 3.5(4)
you must follow the instructions in
performed via the CAS management pages as described below. If you are running release 3.5(3) or 3.5(4)
you must follow the instructions in
.
Step 1
.
Step 2
From the CAM web console, go to Device Management > CCA Servers > Manage [CAS_IP] > Misc
> Update.
> Update.
Figure 13-1
Software Upgrade—CAS Management Pages
Step 3
Click Browse to locate the upgrade file you just downloaded from Cisco Downloads, for example: