Cisco Cisco Clean Access 3.5
3-5
Cisco Clean Access Server Installation and Administration Guide
OL-7045-01
Chapter 3 Install the Clean Access Server
Access the CAS Over a Serial Connection
2.
Give any name to the session and click OK:
3.
In the Connect using dropdown list, choose the COM port on the workstation to which the serial
cable is connected, generally either
cable is connected, generally either
COM1
or
COM2
and click OK.
4.
Configure the Port Settings as follows:
–
Bits per second –
9600
–
Data bits –
8
–
Parity –
None
–
Stop bits –
1
–
Flow control –
None
5.
Go to File > Properties, or click the Properties icon (
) to open the Properties dialog for the
session. Change the Emulation setting to:
–
Emulation–
VT100
You should now be able to access the command interface for the server. You can now:
•
•
•
If you already performed the initial installation, but need to modify the original settings, you can log
in as user
in as user
root
and run the
service perfigo config
command.