Cisco Cisco NAC Appliance 3390 Troubleshooting Guide
Cisco NAC Appliance (Clean Access): Software
Upgrade from 3.x to 4.0(x)
Upgrade from 3.x to 4.0(x)
Document ID: 91887
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Prerequisites
Requirements
Components Used
Conventions
Upgrade to 4.0(x)
Notes on the 4.0(x) Upgrade
Settings that Might Change with the Upgrade
General Upgrade Preparation
Related Information
Notes on the 4.0(x) Upgrade
Settings that Might Change with the Upgrade
General Upgrade Preparation
Related Information
Introduction
This document provides instructions for how to upgrade your existing Cisco Network Admission Control
(NAC) Appliance (formerly Cisco Clean Access [CCA]) system to release 4.0(x).
(NAC) Appliance (formerly Cisco Clean Access [CCA]) system to release 4.0(x).
Prerequisites
Requirements
This document assumes the NAC Appliance software earlier than 4.0(x) is installed and works properly.
Components Used
The information in this document is based on the Cisco NAC Appliance.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Upgrade to 4.0(x)
This section provides general information for how to prepare to upgrade your existing Cisco NAC Appliance
(Clean Access) system to release 4.0(x). This section contains these topics:
(Clean Access) system to release 4.0(x). This section contains these topics:
Notes on the 4.0(x) Upgrade
•
Settings that Might Change with the Upgrade
•
General Upgrade Preparation
•