Cisco Cisco NAC Appliance 3390 Technical Manual
Note: Use the Command Lookup Tool (registered customers only) to obtain more information on the
commands used in this section.
commands used in this section.
Network Diagram
This document uses this network setup:
Figure 1: OOB Cisco NAC Appliance Deployment with Cisco NAC Profiler
Configurations
This document uses these configurations to configure the NAC Profiler and Collectors in an Out−of−Band
solution:
solution:
Configure the NAC Profiler for the OOB Topology
•
Configure the NAC Collector
•
Configure the Access Switch to Send SNMP Traps to the NAC Collector
•
Configure the Access Switch on the Profiler to Gather SNMP Information
•
Configure the ETH3 Switchport of the NAC Collector on the Distribution Switches for SPAN
•
Configure NAC Profiler and Collectors in an Out−of−Band Solution
NAC Servers need to be configured through the normal NAC HA setup.
•
The Collector utilizes the virtual IP address of the NAC Server to communicate with the Profiler.
•