Cisco Cisco Email Security Appliance C190 Leaflet

AsyncOS 9.6 for Cisco Email Security Appliances CLI 참조 가이드

3 장     명령: 참조 예제

  일반 관리 및 문제 해결

예: 다른 메일 서버와의 연결 확인

다음 예에서는 diagnostics를 사용하여 다른 메일 서버와의 연결을 확인합니다. 메시지를 보내거나 
서버를 ping하여 메일 서버를 테스트할 수 있습니다.

mail.example.com> diagnostic

Choose the operation you want to perform:

- RAID - Disk Verify Utility.

- NETWORK - Network Utilities.

- REPORTING - Reporting Utilities.

- TRACKING - Tracking Utilities.

- RELOAD - Reset configuration to the initial manufacturer values.

[]> network

Choose the operation you want to perform:

- FLUSH - Flush all network related caches.

- ARPSHOW - Show system ARP cache.

- NDPSHOW - Show system NDP cache.

- SMTPPING - Test a remote SMTP server.

- TCPDUMP - Dump ethernet packets.

[]> smtpping

Enter the hostname or IP address of the SMTP server:

[mail.example.com]> mail.com

The domain you entered has MX records.

Would you like to select an MX host to test instead? [Y]> y

Select an MX host to test.

1. mx00.gmx.com

2. mx01.gmx.com

[1]>

Select a network interface to use for the test.

1. Management

2. auto

[2]> 1

Do you want to type in a test message to send?  If not, the connection will be tested but 

no email will be sent. [N]>

Starting SMTP test of host mx00.gmx.com.

Resolved 'mx00.gmx.com' to 74.208.5.4.

Unable to connect to 74.208.5.4.

예: 초기 제조업체 값으로 어플라이언스 컨피그레이션 재설정

다음 예에서는 어플라이언스 컨피그레이션을 초기 제조업체 값으로 재설정하는 방법을 보여줍니다.

mail.example.com> diagnostic

Choose the operation you want to perform:

- RAID - Disk Verify Utility.

- NETWORK - Network Utilities.

- REPORTING - Reporting Utilities.

- TRACKING - Tracking Utilities.

- RELOAD - Reset configuration to the initial manufacturer values.

[]> reload