Cisco Cisco Email Security Appliance C190 Leaflet

AsyncOS 9.6 for Cisco Email Security Appliances CLI 참조 가이드

3 장     명령: 참조 예제

  네트워크 컨피그레이션/네트워크 툴

  Limit:              None (Run Indefinitely)

  Interface(s):       ALL

  Filter:             (tcp port 25)

Choose the operation you want to perform:

- START - Start packet capture.

- SETUP - Change packet capture settings.

[]> setup

Enter maximum allowable size for the capture file (in MB)

[200]>

Do you want to stop the capture when the file size is reached? (If not, a new file will be 

started and the older capture data will be discarded.)

[N]>

The following interfaces are configured:

1. Management

2. ALL

Enter the name or number of one or more interfaces to capture packets from, separated by 

commas (enter ALL to use all interfaces):

[2]>

Select an operation. Press enter to continue with the existing filter.

- PREDEFINED - PREDEFINED filter.

- CUSTOM - CUSTOM filter.

- CLEAR - CLEAR filter.

[]>

Capture settings successfully saved.

Current Settings:

  Maximum File Size:  200 MB

  Limit:              None (Run Indefinitely)

  Interface(s):       ALL

  Filter:             (tcp port 25)

Choose the operation you want to perform:

- START - Start packet capture.

- SETUP - Change packet capture settings.

[]>

설명

ping

 명령을 사용하면 어플라이언스에서 네트워크 호스트와의 연결을 테스트할 수 있습니다. 

사용

Commit: 이 명령은 'commit'이 필요하지 않습니다.

클러스터 관리: 이 명령은 시스템 모드로 한정됩니다. 더 나아가 로그인 호스트(즉 로그온한 특정 
시스템)로 한정됩니다. 이 명령은 로컬 파일 시스템에 대한 액세스가 필요합니다.

배치 명령: 이 명령은 배치 형식을 지원하지 않습니다.