Cisco Cisco Email Security Appliance C190 Leaflet

AsyncOS 9.6 for Cisco Email Security Appliances CLI 참조 가이드

3 장     명령: 참조 예제

  안티스팸

For IPv4, CIDR format subnets such as 10.1.1.0/24, IP address ranges such as 10.1.1.10-20, 

and subnets such as 10.2.3. are allowed.

For IPv6, CIDR format subnets such as 2001:db8::/32 and IP address ranges such as 

2001:db8::1-2001:db8::11 are allowed.

Hostnames such as crm.example.com and partial hostnames such as .example.com are allowed.

[]> 192.168.1.2

Do you want to use the "Received:" header or a custom header to determine the originating 

IP address?

1. Use "Received:" header

2. Use a custom header

[1]> 2

Enter the custom header name that contains the originating IP address:

[]> x-Connecting-IP

There are 2 relays defined.

Choose the operation you want to perform:

- NEW - Create a new entry

- EDIT - Modify an entry

- DELETE - Remove an entry

- PRINT - Display the table

[]> print

Incoming                                      Header          Match

relay name:    IP address:                    to parse:       after:      Hops:

-----------    -----------                    ---------       ------      -----

first-hop      192.168.1.1                    Received        [           1

second-hop     192.168.1.2                    x-Connecting-IP n/a         n/a

There are 2 relays defined.

Choose the operation you want to perform:

- NEW - Create a new entry

- EDIT - Modify an entry

- DELETE - Remove an entry

- PRINT - Display the table

[]> delete

1. first-hop:      192.168.1.1

2. second-hop:     192.168.1.2

Enter the number of the entry you wish to delete:

[1]> 1

Incoming relay "first-hop" deleted.

There is 1 relay defined.

Choose the operation you want to perform:

- NEW - Create a new entry

- EDIT - Modify an entry

- DELETE - Remove an entry

- PRINT - Display the table

[]>