Cisco Cisco NAC Appliance 4.1.0
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Cisco NAC Appliance - Clean Access Manager Installation and Administration Guide
OL-12214-01
Chapter 4 Switch Management: Configuring Out-of-Band (OOB) Deployment
Configure OOB Switch Management in the CAM
Add Port Profile
You will need to add a Port profile for each set of Auth/Access VLANs you configure on the switch.
Note
For OOB Virtual Gateways, you must enable and configure VLAN mapping on the CAS for each
Auth/Access VLAN pair configured on the switch. See
Auth/Access VLAN pair configured on the switch. See
1.
Go to Switch Management > Profiles > Port > New.
Figure 4-16
New Port Profile
2.
Type a single word for the Profile Name. You can use digits and underscores, but no spaces. The
name should reflect whether the Port profile is managed or unmanaged.
name should reflect whether the Port profile is managed or unmanaged.