Cisco Cisco NAC Appliance 4.1.0
11-10
Cisco NAC Appliance - Clean Access Manager Installation and Administration Guide
OL-12214-01
Chapter 11 Distributing the Clean Access Agent
Enable Network Access (L3 or L2)
Enable L3 Support
This section describes how to enable L3 support on the CAS for web login or Clean Access Agent users.
1.
Go to Device Management > CCA Servers > List of Servers and click the Manage button (
) for
the CAS. The management pages for the Clean Access Server appear.
2.
Click the Network tab. The IP form appears by default.
Figure 11-3
CAS Network Tab
3.
The Clean Access Server Type should display the Server Type selected when the CAS was added
to the CAM.
to the CAM.
4.
Click the checkbox for Enable L3 support.
5.
The Trusted Interface and Untrusted Interface settings should match the configuration
parameters given during the installation or your configured settings.
parameters given during the installation or your configured settings.
6.
Click Update.
7.
Click Reboot.
8.
For Clean Access Agent users, make sure the Discovery Host field is correct under Device
Management > Clean Access > Clean Access Agent > Installation.
Management > Clean Access > Clean Access Agent > Installation.
Note
•
The enable/disable L3 feature is disabled by default. You must Update and Reboot for changes in
this setting to take effect.
this setting to take effect.
•
L3 must be enabled for the Clean Access Agent to work with VPN tunnel mode.