Cisco Cisco NAC Appliance 4.1.0
Cisco NAC Appliance - Clean Access Manager Installation and Administration Guide
OL-12214-01
Chapter 4 Switch Management: Configuring Out-of-Band (OOB) Deployment
Configure OOB Switch Management in the CAM
Add Switch Profile
Use the following steps to add a Switch profile.
1.
Go to Switch Management > Profiles > Switch > New.
Figure 4-13
New Switch Profile
2.
Enter a single word for the Profile Name. You can use digits and underscores, but no spaces.
Tip
It is a good idea to enter a Switch Profile name that identifies the switch model and SNMP read
and write versions, for example “2950v2v3.”
and write versions, for example “2950v2v3.”
3.
Choose the Switch Model for the profile from the dropdown menu.
4.
Enter the SNMP Port configured on the switch to send/receive traps. The default port is 161.
5.
Enter an optional Description.
6.
Configure SNMP Read Settings to match those on the switch.
Choose the SNMP Version: SNMP V1 or SNMP V2C.
Type the Community String configured for the switch.
7.
Configure SNMP Write Settings to match those on the switch.
Choose the SNMP Version: SNMP V1, SNMP V2C, or SNMP V3
Type the Community String for SNMP V1 or SNMP V2C configured for the switch.
8.
If SNMP v3 is used for SNMP write settings on the switch, configure the following settings to match
those on the switch:
those on the switch:
Choose a Security Method from the dropdown menu: NoAuthNoPriv, AuthNoPriv(MD5),
AuthNoPriv(SHA), AuthPriv(MD5+DES-CBC), or AuthPriv(SHA+DES-CBC)
AuthNoPriv(SHA), AuthPriv(MD5+DES-CBC), or AuthPriv(SHA+DES-CBC)
Type the User Name