Cisco Cisco NAC Appliance 4.1.0
4-17
Cisco NAC Appliance - Clean Access Server Installation and Administration Guide
OL-12213-01
Chapter 4 Installing the Clean Access Server NAC Appliance
Perform the Initial Configuration
21.
If running the
service perfigo config
configuration utility, run the following command to reboot
the server:
service perfigo reboot
22.
The initial configuration is now complete. Once the Clean Access Manager is also installed and
initially configured, use the CAM web administration console to add the CAS to the CAM as
described in
initially configured, use the CAM web administration console to add the CAS to the CAM as
described in
Important Notes for SSL Certificates
•
You must generate the SSL certificate during CAS installation or you will not be able to access your
server as an end user.
server as an end user.
•
After CAM and CAS installation, make sure to synchronize the time on the CAM and CAS via the
web console interface before regenerating a temporary certificate on which a Certificate Signing
Request (CSR) will be based. For further details on the CAS, see:
web console interface before regenerating a temporary certificate on which a Certificate Signing
Request (CSR) will be based. For further details on the CAS, see:
–
–
–
For details on the CAM, see the Cisco NAC Appliance - Clean Access Manager Installation and
Administration Guide.
Administration Guide.
•
Before deploying the server in a production environment, you can acquire a trusted certificate from
a Certificate Authority to replace the temporary certificate (in order to avoid the security warning
that is displayed to end users during user login).
a Certificate Authority to replace the temporary certificate (in order to avoid the security warning
that is displayed to end users during user login).