Cisco Cisco NAC Appliance 4.1.1 Release Notes
52
Release Notes for Cisco NAC Appliance (Cisco Clean Access) for Version 4.1(1)
OL-12454-01
New Installation of Release 4.1(1)
New Installation of Release 4.1(1)
If you purchased and/or are performing a new installation of Cisco NAC Appliance (Cisco Clean
Access), use the steps described below.
Access), use the steps described below.
.
For New Installation:
1.
If you are going to perform a new installation but are running a previous version of Cisco Clean
Access, back up your current Clean Access Manager installation and save the snapshot on your local
computer, as described in
Access, back up your current Clean Access Manager installation and save the snapshot on your local
computer, as described in
.
2.
Follow the instructions on your welcome letter to obtain a license file for your installation. See
Clean Access, visit
to obtain an evaluation license.)
3.
Install the latest version of 4.1(1) on each Clean Access Server and Clean Access Manager, as
follows:
follows:
a.
Insert the product CD in the CD-ROM drive for each target installation machine, and follow the
auto-run procedures.
auto-run procedures.
b.
Or, login to Cisco Secure Software and download the latest 4.1.1.x.ISO image from
and burn it as a
bootable disk to a CD-R. Insert the CD into the CD-ROM drive of each installation server.
Follow the instructions in the auto-run installer.
Follow the instructions in the auto-run installer.
4.
After software installation, access the Clean Access Manager web admin console by opening a web
browser and typing the IP address of the CAM as the URL. The Clean Access Manager License
Form will appear the first time you do this to prompt you to install your FlexLM license files.
browser and typing the IP address of the CAM as the URL. The Clean Access Manager License
Form will appear the first time you do this to prompt you to install your FlexLM license files.
5.
Install a valid FlexLM license file for the Clean Access Manager (either evaluation, starter kit, or
individual license). You should have already acquired license files as described in
individual license). You should have already acquired license files as described in
.
6.
At the admin login prompt, login with the default user name and password
admin/cisco123
or with
the web console username and password you configured when you installed the Clean Access
Manager.
Manager.
7.
In the web console, navigate to Administration > CCA Manager > Licensing if you need to install
any additional FlexLM license files for your Clean Access Servers.
any additional FlexLM license files for your Clean Access Servers.
8.
For detailed software installation steps and further steps for adding the Clean Access Server(s) to
the Clean Access Manager and performing basic configuration, refer to the following guides:
the Clean Access Manager and performing basic configuration, refer to the following guides:
Note
Clean Access Manager 4.1(1) is bundled with Clean Access Agent 4.1.1.0.