Datalogic 94A051966 Leaflet
Datalogic Memor™ Power
Adapter Cable
The Datalogic Memor™ Power Adapter Cable allows
powering the Datalogic Memor™ mobile computer (either
directly or through the Powered Vehicle Dock).
THE PACKAGE
The Power Adapter Cable package includes the following
items:
Figure 1
A)
Power Adapter Cable
B)
CLA Battery Female Adapter
C)
Fuse Holder
852000491 (Rev. A)
THE POWER ADAPTER CABLE
Figure 2a
Figure 2b
A)
Green LED
B)
Fuse (2.5A 250V)
When the Power Adapter Cable is powered, the green
LED lights up.
The Power Adapter Cable fuse can be easily replaced by
unscrewing the ring nut and removing the cap (see Figure
2a).
POWERING THE MEMOR™ POWERED
VEHICLE DOCK
VEHICLE DOCK
Powering the dock/ Memor in your vehicle.
1.
Plug in the supplied Power Adapter Cable into your
vehicle’s cigarette lighter or 12V or 24V power
source;
vehicle’s cigarette lighter or 12V or 24V power
source;
2.
insert the Power Adapter Cable output connector:
a)
in the power port at the right bottom of the
dock (see figure 3a). When the dock is
powered, the green LED lights up;
dock (see figure 3a). When the dock is
powered, the green LED lights up;
b)
in the port at the bottom of the mobile
computer (see figure 3b).
computer (see figure 3b).
Figure 3a
Figure 3b
CAUTION
Make sure your vehicle’s output voltage is
between 10V to 32V, and is capable of
supporting a 2000mA current drain. If you
have any concerns regarding this, refer to
your vehicle owner’s manual.
between 10V to 32V, and is capable of
supporting a 2000mA current drain. If you
have any concerns regarding this, refer to
your vehicle owner’s manual.
CAUTION
When the Power Adapter Cable is connected
to the Memor, it is recommended not to lift
the mobile computer by the Power Adapter
Cable.
to the Memor, it is recommended not to lift
the mobile computer by the Power Adapter
Cable.
B
A
B
A
C