Cisco Cisco Aironet 1200 Access Point Installation Guide
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
8
Removing the Blank Spacer Card
When your access point is not factory-configured with a 2.4-GHz radio, it
contains a blank spacer card in the internal mini-PCI connector. You must
remove the blank spacer card prior to installing a new 2.4-GHz radio card.
contains a blank spacer card in the internal mini-PCI connector. You must
remove the blank spacer card prior to installing a new 2.4-GHz radio card.
Caution
Handle all components carefully and observe all ESD
precautions. The internal access point components and the
2.4-GHz radio can be damaged by ESD if not handled properly.
precautions. The internal access point components and the
2.4-GHz radio can be damaged by ESD if not handled properly.
Follow these steps to remove the blank spacer card from the mini-PCI
connector. It may be helpful to refer to the following illustration before you
proceed.
connector. It may be helpful to refer to the following illustration before you
proceed.