Cisco Cisco Aironet 1600i Access Point Technical Manual
Navigate to Security > Local Radius Server > General Set−Up tab. Define the EAP protocols you
wish to use. In this example, enable Light Extensible Authentication Protocol (LEAP) authentication.
wish to use. In this example, enable Light Extensible Authentication Protocol (LEAP) authentication.
2.
You can also add Network Access Server (NAS) IPs and client username/password credentials on the
same page. The configuration of a local RADIUS on a WDS AP is complete.
same page. The configuration of a local RADIUS on a WDS AP is complete.
3.
Local RADIUS Server Configuration on WDS Client AP
This figure shows how to configure the IP address of the WDS AP as the RADIUS server: