Cisco Cisco Aironet 1830i Access Point Data Sheet
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 8
Feature
Specifications
Available transmit
power settings
power settings
2.4 GHz
● 22 dBm
● 19 dBm
● 16 dBm
● 13 dBm
● 10 dBm
● 7 dBm
● 4 dBm
● 1 dBm
● 19 dBm
● 16 dBm
● 13 dBm
● 10 dBm
● 7 dBm
● 4 dBm
● 1 dBm
5 GHz
● 23 dBm
● 20 dBm
● 17 dBm
● 14 dBm
● 11 dBm
● 8 dBm
● 5 dBm
● 2 dBm
● 20 dBm
● 17 dBm
● 14 dBm
● 11 dBm
● 8 dBm
● 5 dBm
● 2 dBm
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for
specific details.
specific details.
Integrated antenna
● 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°
● 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
● 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
Interfaces
● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
● Management console port (RJ-45)
● USB 2.0 (enabled via future software)
● Management console port (RJ-45)
● USB 2.0 (enabled via future software)
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions
(W x L x H)
● Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
Weight
● 3.12 lb (1.41 kg)
Environmental
Cisco Aironet 1830i
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: 32° to 104°F (0° to 40°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: 32° to 104°F (0° to 40°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
System memory
● 1 GB DRAM
● 256 MB flash
● 256 MB flash
Input power
requirements
requirements
● AP1830: 44 to 57 VDC
● Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
● Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
Power draw
● 15.4W
Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by
some amount, depending on the length of the interconnecting cable.
some amount, depending on the length of the interconnecting cable.
Powering options
● 802.3af/802.3at
● Enhanced PoE
● Cisco local power supply, AIR-PWR-C=
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports 802.3af only), AIR-PWRINJ6=
● Enhanced PoE
● Cisco local power supply, AIR-PWR-C=
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports 802.3af only), AIR-PWRINJ6=
Note: If 802.3af PoE is the source of power, the USB port is disabled.
Warranty
Limited lifetime hardware warranty
Compliance
standards
standards
◦
UL 60950-1
◦
CAN/CSA-C22.2 No. 60950-1
◦
UL 2043
◦
IEC 60950-1
◦
EN 60950-1
● Radio approvals:
◦
FCC Part 15.247, 15.407
**
◦
RSS-210 (Canada)
◦
EN 300.328, EN 301.893 (Europe)
◦
ARIB-STD 66 (Japan)
◦
ARIB-STD T71 (Japan)
◦
EMI and susceptibility (Class B)
◦
FCC Part 15.107 and 15.109
**
◦
ICES-003 (Canada)
◦
VCCI (Japan)