Cisco Cisco Mobility Unified Reporting Administrator's Guide
Mobility Unified Reporting System Overview
▀ MUR Features
▄ Cisco Mobility Unified Reporting System Installation and Administration Guide
34
OL-27216-09
Figure 4.
Scalable Setup of MUR
The following procedure outlines the steps to be followed for configuring the scalable network model.
1. Install MUR in RDP mode on four nodes NYRDP1, NYRDP2, CHRDP1, CHRDP2, and in Master mode on
fifth node.
2. Connect shared storage 1 to NYRDP1 and NYRDP2. Similarly, connect shared storage 2 to CHRDP1 and
CHRDP2.
3. After configuring mount point and permissions, configure GWNY1 to push files to NYRDP1 on the shared
storage 1 and GWCH1 to push files to CHRDP1 on shared storage 2.
Important:
Ensure to check if EDR push functionality is configured on the gateway to send
files to the RDP and shared path.
4. Configure two regions, New York and Chicago. To perform this, invoke System menu from MUR GUI and then
click Regions.
Important:
While configuring regions, select Parent as NOC.
5. Configure the RDPs. For example, to configure NYRDP1, on the GUI select Admin tab, click RDP from the left
navigation pane and then click Add RDP.