Cisco Cisco Mobility Unified Reporting Release Note
Configuration Management
Generally Available 04-30-2013
3-36
CLI (PDSN Service Config Mode)
aaa nas-ip-address
ip-address
aaa 3gpp2-service-option
service option
show ipv6 ospf
Following command shows ipv6 ospf options and its results.
CLI (Context Configuration Mode)
show ipv6 ospf [ database [ adv-router
IPv4-Address
] [ls-type { external |
inter-prefix | inter-router | intra-prefix | link | network | router } ] [
verbose ] [ | {
grep
grep_options
| more } ] ] [ debugging ] [ interface ] [
neighbor [ details ] ] [ route [ summary ] ] [ virtual-links ] [ | { grep
grep_options
| more } ]
Serving Gateway Commands - New in Release 12.0
This section provides information on new commands available in Release 12.0.
apn-profile
The S-GW now supports the use of the APN Profile Configuration Mode commands. The
apn-profile
name
command is located in the Global Configuration Mode.
CLI (APN Profile Configuration Mode)
The following commands in this mode are supported by the S-GW:
cc { local-value-for-scdrs behavior
bit_value profile index_bit | prefer {
hlrvalue-for-scdrs | local-value-for-scdrs } }
description
description
idle-mode-acl { ipv4 | ipv6 } access-group
group_name
ip { qos-dscp { { downlink | uplink } { background
forwarding |
conversational
forwarding | interactive traffic-handling-priority
priority_forwarding | streaming forwarding } + } | source-violation {
deactivate [ all-pdp | excludefrom accounting | linked-pdp |
tolerance-limit } | discard [ exclude-fromaccounting ] | ignore }
call-control-profile
The S-GW now supports the use of the Call Control Profile Configuration Mode
commands. The
commands. The
call-control-profile
name
command is located in the Global
Configuration Mode.