Sekonic L-308 DC 100349 Leaflet
Product codes
100349
L-308S Basic Operation
Set ISO
While holding down ISO button, press the Up/Down buttons.
Use as Reflected Meter
Use as Reflected Meter
Slide Lumisphere away to expose meter cell.
Use as Incident Meter
Use as Incident Meter
Slide Lumisphere over meter cell.
Measure Brightness /Contrast Difference
Measure Brightness /Contrast Difference
Clip in flat Lumidisc over meter cell.
Ambient Reading
Ambient Reading
Select Ambient Mode, press Measuring button.
Cordless Flash Reading
Cordless Flash Reading
Select Cordless Flash Mode, press Measuring button
to manually trigger the flash.
Flash Reading Using Flash Cord
Flash Reading Using Flash Cord
Select Flash with Cord Mode, connect flash synchro cord
into PC socket and press the Measuring button.
EV Reading
EV Reading
Select
Ambient EV Mode. In Ambient Mode, change
between F/Stop and EV readout by holding down ISO button
and pressing Mode button.
To Set Increments of Reading
To Set Increments of Reading
1.Turn power off.
2.Press down Mode button while turning on meter.
3.Press Mode button to select Full, 1/2 or 1/3 f-stop increment
reading.
4.Turn power off and then back on to activate functions.