Cisco Cisco SG220-26P 26-Port Gigabit PoE Smart Plus Switch User Guide

IPv4 Management and Interface

Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x

174

To manage the switch by using the web-based interface, the IPv4 management IP 
address must be defined and known. The switch IP address can be manually 
configured or automatically taken from a DHCP server.

To configure the IPv4 management IP address:

Click Administration > Management Interface > IPv4 Interface. 

Enter the following information:

•

Management VLAN—Select the management VLAN used to access the 
switch through Telnet or the web-based interface. VLAN1 is the default 
management VLAN.

•

IP Address Type—Select one of the following options:

-

Dynamic—Discovers the IP address using DHCP from the management 
VLAN.

-

Static—Manually defines a static IP address. 

If a static IP address is used, enter the following fields: 

•

IP Address—Enter the management IP address of the switch. The default is 
192.168.1.254. 

•

Mask—Enter the IP address mask or prefix length.

-

Network Mask

—Select and enter the IP address mask.

-

Prefix Length

—Select and enter the length of the IPv4 address prefix.

•

Administrative Default Gateway—Select User Defined to manually enter 
the default gateway IP address, or select None to remove the selected 
default gateway IP address from the interface. 

•

Operational Default Gateway—Displays the current default gateway IP 
address. 

If the switch is not configured with a default gateway, it cannot 

communicate with other devices that are not in the same IP subnet.