Cisco Cisco SG300-28 28-Port Gigabit Managed Switch Technical References
Quality of Service (QoS) Commands
694
78-20269-01 Command Line Interface Reference Guide
43
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, or Port-channel.
following types: Ethernet port, or Port-channel.
Default Configuration
N/A
Command Mode
EXEC mode
User Guidelines
If no parameter is specified with the show qos interface command, the port QoS
mode (DSCP trusted, CoS trusted, untrusted, and so on), default CoS value,
DSCP-to-DSCP- map (if any) attached to the port, and policy map (if any) attached
to the interface are displayed. If a specific interface is not specified, the
information for all interfaces is displayed.
mode (DSCP trusted, CoS trusted, untrusted, and so on), default CoS value,
DSCP-to-DSCP- map (if any) attached to the port, and policy map (if any) attached
to the interface are displayed. If a specific interface is not specified, the
information for all interfaces is displayed.
Examples
Example 1 - This is an example of the output from the show qos interface
queueing command for 4 queues
queueing command for 4 queues
witchxxxxxx#
show qos interface queueing gi1
Ethernet gi1
wrr bandwidth weights and EF priority:
qid-weights Ef - Priority
1 - N/A ena- 1
2 - N/A ena- 2
3 - N/A ena- 3
4 - N/A ena- 4
Cos-queue map:
cos-qid
0 - 1
1 - 1
2 - 2
3 - 3
4 - 3