Cisco Cisco Packet Data Interworking Function (PDIF) Troubleshooting Guide
SSH Configuration Mode Commands
max servers ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
max servers
Configures the maximum number of SSH servers that can be started within any 60 second interval. If this limit is
reached, the system waits two minutes before trying to start any more servers.
reached, the system waits two minutes before trying to start any more servers.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Default: 40
Specifies the maximum number of servers that can be spawned in any 60 second interval. number must be a
value in the range from 1 to 100.
Specifies the maximum number of servers that can be spawned in any 60 second interval. number must be a
value in the range from 1 to 100.
Usage
Set the number of servers to tune the system response as a heavily loaded system may need more servers to
support the incoming requests.
The converse would be true as well in that a system can benefit by reducing the number of servers such that
telnet services do not cause excessive system impact to other services.
support the incoming requests.
The converse would be true as well in that a system can benefit by reducing the number of servers such that
telnet services do not cause excessive system impact to other services.
Example