Cisco Cisco Packet Data Gateway (PDG) Troubleshooting Guide
SGSN Multiple Address Group Configuration Mode Commands
▀ address
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
address
This command specifies and IP address to include in the current SGSN Multiple Address Group.
Product
GGSN
Privilege
Security Administrator, Administrator
Syntax
Delete the specified IP address or IP address and netmask from the current SGSN Multiple Address Group.
Specifies the IP address or IP address and netmask to include in the current SGSN Multiple Address Group.
is an IPv4 address in dotted-decimal notation and
is the number of subnet bits,
representing a subnet mask in shorthand. These must be entered in the dotted-decimal notation/subnet bits
format (1.1.1.1/24).
format (1.1.1.1/24).
Usage
Use this command to specify an IP address or IP address and netmask to include in the current SGSN
Multiple Address Group.
Multiple Address Group.
Example
The following command adds the IP address 10.1.2.250 to the current SGSN Multiple Address Group:
The following command adds the IP address 10.1.2.250 to the current SGSN Multiple Address Group: