Cisco Cisco Packet Data Interworking Function (PDIF) Troubleshooting Guide
ACS Configuration Mode Commands
nat allocation-failure ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
nat allocation-failure
Configures action to take when NAT IP/Port allocation fails.
Important:
This command is only available in StarOS 8.3 and later releases.
Product
NAT
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default: Packets are dropped silently
Default: Packets are dropped silently
Disables the NAT Allocation Failure configuration.
When set, packets are dropped silently.
When set, packets are dropped silently.
Specifies sending ICMP Destination Unreachable message when NAT IP/Port allocation fails.
Usage
Use this command to configure the action to take when NAT IP/port allocation fails—to send or not to send
an ―ICMP destination unreachable message‖ when a NAT IP/port cannot be assigned to a flow in data-path.
an ―ICMP destination unreachable message‖ when a NAT IP/port cannot be assigned to a flow in data-path.
Example
The following command configures sending ICMP Destination Unreachable message when NAT IP/Port allocation
fails:
The following command configures sending ICMP Destination Unreachable message when NAT IP/Port allocation
fails: