Cisco Cisco Tunnel Terminating Gateway (TTG) Troubleshooting Guide
Context Configuration Mode Commands
▀ pdsn-service
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
pdsn-service
Creates/deletes a packet data service or specifies an existing PDSN service for which to enter the Packet Data Service
Configuration Mode for the current context.
Configuration Mode for the current context.
Product
PDSN
Privilege
Security Administrator, Administrator
Syntax
Indicates the packet data service specified is to be removed.
Specifies the name of the PDSN service to configure. If
does not refer to an existing service, the new
service is created if resources allow.
must be from 1 to 63 alpha and/or numeric characters.
Usage
Enter the PDSN Service Configuration Mode for an existing service or for a newly defined service. This
command is also used to remove an existing service.
A maximum of 256 services (regardless of type) can be configured per system.
command is also used to remove an existing service.
A maximum of 256 services (regardless of type) can be configured per system.
Caution:
Large numbers of services greatly increase the complexity of management and may impact overall
system performance (i.e. resulting from such things as system handoffs). Therefore, it is recommended that a large
number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
Example
The following command will enter the PDSN Service Configuration Mode creating the service
The following command will enter the PDSN Service Configuration Mode creating the service
, if
necessary.
The following command will remove
as being a defined PDSN service.