Cisco Cisco Tunnel Terminating Gateway (TTG) Troubleshooting Guide
PVC Interface Configuration Mode Commands
▀ ip ospf hello-interval
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ip ospf hello-interval
This command configures the delay time in seconds, for OSPF hello interval.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Deletes the value set and returns the value to its default.
The interval, in seconds, between sending hello packets. This value is typically set to be 1/4 of the value of
the
the
.
must be an integer from 1 through 65535. Default: 10
Usage
Use this command to set the delays for the hello-interval.
Example
To set the hello-interval to 25, use the following command;
To set the hello-interval to 25, use the following command;
To delete the setting for the hello-interval and reset the hello-interval value to its default of 10, use the following
command‘
command‘