Cisco Cisco Tunnel Terminating Gateway (TTG) Troubleshooting Guide
SMS Service Configuration Mode Commands
▀ smsc-address-selection-prioritization
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
smsc-address-selection-prioritization
Define the routing selection priority for the SMSC (short message service center) address to be used for all MO-SMS.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Configures a priority for the SMSC address send from the MS.
: Value must be a single digit, range 1-3.
Configures a priority for the SMSC address that is based on the IMSI-prefix.
: Value must be a single digit, range 1-3.
Configures a priority for the SMSC address that is based on the MSISDN-prefix.
: Value must be a single digit, range 1-3.
By including the
keyword with the command, the SGSN knows to use the encoded default
priorities for SMSC address selection for SMSC routing:
priority 1,
priority 2,
priority 3.
Usage
Use this command to define SMSC address routing priorities. Priorities must be defined for all parameters, all
keywords, but they can be entered in any order. The addresses for the SMSCs are defined with the
keywords, but they can be entered in any order. The addresses for the SMSCs are defined with the
An operator can use this configuration to prevent subscribers from using unauthorized SMSC addresses, for
example, an unauthorized international SMSC.
example, an unauthorized international SMSC.
Example
The keywords can be entered in any order but all keywords must be included in the command:
The keywords can be entered in any order but all keywords must be included in the command: