Cisco Cisco Packet Data Gateway (PDG) Maintenance Manual

Generally Available 06-30-2010

New Configuration Commands

3-57

Session Control Manager Commands - New in Release 8.1

This section provides information on new commands available in Release 8.1.

authorization

This command configures the policy to allow early bandwidth authorization. Default is
disabled.

CLI (CSCF Policy Rules Configuration Mode)

[ default | no ] authorization early-bandwidth

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

interface

This command enables the collection of interface SIP statistics in a CSCF service.

CLI (CSCF Service Configuration Mode)

[ no ] interface statistics sip

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

nat-policy

This command configures a NAT (Network Address Translation) policy for the service if
the CSCF service is performing one of the following functions:

●

CSCF services are run in bridging (Back-to-Back User Agent) mode

●

A-BG is an Application-level Gateway (ALG) for NAT

CLI (CSCF Service Configuration Mode)

nat-policy policy_name private-address { address ip_address_mask | default

| range start_ip_address end_ip_address }

no nat-policy policy_name

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

plmn-id

This command configures the MCC+MNC pair (plmn-id) used to match location specific
emergency/service numbers. Default is disabled.

CLI (CSCF Proxy-CSCF Configuration Mode)

plmn-id mcc code mnc code

no plmn-id

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.