Panasonic PT-ST10E User Manual

Panasonic's Daylight View Basic technology achieves sharp, 

easy-to-see images by clearly reproducing the details in dark image 

areas, which were previously difficult to see in brightly lit rooms. 

A built-in sensor measures the ambient light, and the Daylight View 

Basic function adjusts the halftone colour and brightness level 

according to the surrounding illumination.

Projecting onto a whiteboard normally 

causes viewers to experience glare.

However, the Panasonic Whiteboard mode 

reduces glare while also properly

reproducing images.

Panasonic employs a number of advanced technologies — including a 

proprietary lamp drive system — that help maintain lamp performance.

This has resulted in a 5,000-hour

*1

 lamp 

replacement cycle. It helps saving operating 

cost by providing longer usage between lamp 

replacements.

Momentary power outages

*3

 or voltage drops

*4

 can cause the projector 

to shut down, interrupting the projection. The PT-ST10E equipped with 

the Intelligent Power Management function 

controls the power supply to cope with

power fluctuations, to enable continued 

projection.

The noise level is as low as 29-dB

*7

. This helps your audience to keep 

their attention on the discussion or on the screen images during quiet 

scenes.

The ecological design of the PT-ST10E greatly reduces its 

environmental impact. In Eco Standby mode, power consumption is 

only 0.4 W

*5

. As examples of other environmental design features, the 

uncoated cabinet uses no halogenated flame retardants, the lens uses 

lead-free glass, and an Auto Off Timer switches the projector to 

Standby mode when no input signal is received for a preset time. The 

PT-ST10E also complies with the standards of the RoHS Directive

*6

.

*1  With the lamp mode in Eco mode. This value is calculated by continuously turning the lamp on for 2 hours and off for 0.25 hour. The lamp replacement cycle will decrease if the lamp is 
turned on/off more frequently, or if it is left on for longer intervals. *2 Fluctuations may occur in the electricity power supply except the power outage. *3 Continuing 0V power supply during 
several tens of milliseconds. *4 Power supply voltage reduction. Excluding momentary power outage. *5 In Eco Standby mode, network functions such as Standby On via LAN are not 
available, and only certain commands can be received from RS-232C control. *6 Restriction of the use of certain Hazardous Substances. The specified toxic substances used in the electrical 
and electronic equipment that is manufactured and distributed within Europe are controlled (the six substances are lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls 
(PBB), and polybrominated diphenyl esters (PBDE)), and all Panasonic projectors comply with the standards of the European RoHS Directive.*7 Lamp mode : Eco 

High Basic Performance, Including a 5,000-hour*

1

 Lamp Replacement Cycle

PT-

ST10E