Cisco Cisco Aironet 1400 Wireless Bridge Installation Guide
5
Cisco Aironet 1400 Series Outdoor Wireless Bridge 9.5-dBi Sector Antenna
78-15546-01
Installation Notes
Figure 1
Installation details
Choosing a Mounting Location
The antenna is designed to create a directional broadcast pattern. To achieve the pattern, mount the
antenna clear of any obstructions between it and device to which the bridge will associate.
antenna clear of any obstructions between it and device to which the bridge will associate.
Tools and Equipment Required
To install the antenna, you need the following tools and equipment.
•
Two 2-in. (5-cm) diameter hose clamps (provided)
•
Drill and appropriate drill bit (if mounting to a vertical surface)
•
Appropriate fasteners (if mounting to a vertical surface)
•
Torque-limiting pliers (Milbar Model 45Z or equivalent)
•
A ¾-in. (19-mm) wrench open-end wrench
•
Standard screwdriver
•
Coaxial connector sealing compound (not provided)