Cisco Cisco Aironet 1310 Access Point Bridge Data Sheet
Ordering Guide
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 4
Software Options
Cisco Aironet 1300 Series devices can be ordered as an autonomous access point or bridge (AIR-BR1310G-x-K9 or
AIR-BR1310G-x-K9 R). Alternatively, you can order an LWAPP-based version that works along with Cisco wireless
LAN controllers (AIR-LAP1310G-x-K9 orAIR-LAP1310AG-x-K9R). When you order an autonomous Cisco Aironet
1300 Series device, you must select the software image as part of the configuration. When you order an LWAPP-
based Cisco Aironet 1300 Series device, no software need be specified because this is managed by the controller.
Mounting Kits for Cisco Aironet 1300 Series Outdoor Access Point/Bridges
A Roof Mount Kit is available for use with the Cisco Aironet 1300 Series Outdoor Access Point or Bridge (integrated
antenna and connectorized versions). A Wall Mount Kit is available for use with the Cisco Aironet 1300 Series
Outdoor Access Point or Bridge with the RP-TNC type connector. The Wall Mount Kit is for indoor use only. These
kits must be ordered separately (Table 3).
Table 3.
Mounting Kits for Cisco Aironet 1300 Series Outdoor Access Point or Bridge
Product Number
Product Description
AIR-ACCWAMK1300=
●
Cisco Aironet 1300 Series Wall Mount Kit for use with AIR-BR1310G-x-K9-R or AIR-LAP1310G-x-K9R
●
Kit includes:
◦
Wall-mount bracket
◦
Mounting hardware
◦
1-ft, dual RG-59 cable assembly (Ethernet uplink from power injector)
AIR-ACCRMK1300=
●
Cisco Aironet 1300 Series Roof Mount Kit for use with AIR-BR1310G-x-K9, AIR-BR1310G-x-K9-R, AIR-
LAP1310G-x-K9, or AIR-LAP1310G-x-K9R
●
Kit includes:
◦
Roof-mount mast (pole and mounting base)
◦
Multifunction mount (allows mounting to roof-mount mast, or directly to a wall)
◦
Mounting hardware
◦
20-ft dual RG-6 cable assembly with F-Type connectors
◦
50-ft dual RG-6 cable assembly with F-Type connectors
◦
Coaxial sealant
◦
One Cisco Aironet grounding block
◦
Grounding lug
◦
Anticorrosion gel
◦
U-bolts
◦
Optional 100-ft dual RG-6 cable available separately
Antennas for Cisco Aironet 1300 Series Outdoor Access Point or Bridge with RP-TNC Type
Connectors
The Cisco Aironet 1300 Series Outdoor Access Point or Bridge with RP-TNC type connectors is certified to operate
with the complete range of Cisco 2.4-GHz antennas listed in Table 4. Note that some high-gain antennas are
applicable only for the Cisco Aironet 1300 Series operating as a bridge. Because of this, and because the LWAPP-
based Cisco Aironet 1300 Series operates only as an access point, these antennas are not supported by Cisco
wireless LAN controllers or in the Cisco Wireless Control Software (WCS). The antennas that are not supported by
wireless LAN controllers or WCS are marked by an asterisk in Table 4.
Antennas must be ordered separately.
Table 4.
Antennas for the Cisco Aironet 1300 Series Outdoor Access Point or Bridge with RP-TNC Type Connector
Product Number
Product Description
AIR-ANT2414S-R*
Cisco Aironet 2.4-GHz, 14-dBi sector antenna
AIR-ANT2506
Cisco Aironet 2.4-GHz, 5.2-dBi omnidirectional mast-mount antenna
AIR-ANT24120*
Cisco Aironet 2.4-GHz, 12-dBi omnidirectional mast-mount antenna